亚洲综合亚洲,色资源AV中文无码先锋,欧美午夜三级

Large space industrial heating how to achieve energy efficient?

time：2024-12-31
hits：606次
source：正弘奧能

At present, gas radiant heating is mostly adopted in large industrial buildings. The gas radiant heating system uses natural gas to burn in the generator to produce high-temperature flue gas. The flue gas flows in the negative pressure radiant tube, causing the surface temperature of the radiant tube to rise. The high-temperature surface of the radiant tube generates infrared radiation, which transfers heat to the heating area. When infrared rays hit the human body, they are absorbed and converted into heat energy, achieving the purpose of heating. Just like the sun in winter, even though the outdoor temperature is very low, the infrared rays emitted by the sun make people feel warm. This method has changed the traditional way of heating the entire space's air and directly heats the human body. There is no convection, no heat exchange, and no pipeline loss, so the thermal efficiency is high, reaching over 90%. 


	 
 


	<img src="http://m.soooyo.cn/Uploads/image/20241231/20241231113158_88369.png" alt="" /> 
 

 
IMPRESIND gas radiant heating system promoted and sold by Beijing Leadway Power Co., Ltd. is an independent heating system that can be installed either on the roof or on the wall. The power of the radiant heating generator ranges from 180 to 270KW, with a maximum length of 120 meters. This device is an independent gas suspended heating equipment. As it does not heat the air, it is particularly suitable for heating large industrial buildings with poor insulation and sealing conditions and frequently opened doors, such as industrial plants, warehouses, hangars and other types of large spaces. 
 

	Although IMPRESIND gas radiant heating system shares the same principle as prefabricated radiant tubes (gas radiant small tube equipment), its lower surface temperature, special geometric structure that expands the diversity of layout, advanced combustion and flue gas circulation system, and extremely low emissions of carbon monoxide and nitrogen oxides make it significantly different from the latter. It is an energy-efficient and environmentally friendly heating device and the preferred product for heating large-space buildings. 


	 
 


	<img src="http://m.soooyo.cn/Uploads/image/20241231/20241231113228_70137.png" alt="" /> 
 

 
IMPRESIND gas radiant heating system has achieved remarkable energy-saving effects in solving the problem of industrial heating in large spaces compared with traditional boiler heating, especially for intermittent use sites, where heating costs can be reduced by more than 30%. The on/off function is fully controlled by intelligent software and hardware, with preset times and temperatures. For instance, it automatically turns on in the morning when people start work and turns off after work. A duty temperature, such as 5℃, can be set at night for low-temperature maintenance without the need for dedicated personnel to monitor. It also enables zoned temperature control, allowing only the necessary equipment to be turned on for individual overtime work, while the rest remain off, achieving local heating and saving energy. No other heating methods can achieve this. This is an advanced energy-saving method for industrial heating in large spaces that is currently popular worldwide. Therefore, the operating cost of this heating form will be significantly reduced.

小峰色戒网站_大奶一区_久久久国产毛片_欧美成人V片观看_国产一级片久久_久久久久1

Large space industrial heating how to achieve energy efficient?