神马三级我不卡,亚洲影院国产,国产浴室后入懂色

Efficient heating and intelligent temperature control of IMPRESIND gas radiant heating system

time：2024-10-23
hits：862次
source：正弘奧能

Gas radiation heating method is currently mostly used in large industrial buildings. Compared with traditional boiler heating, gas infrared radiation heating not only solves the problem of industrial heating in large spaces, but also has more obvious energy-saving effects, especially for intermittent use places, where the heating expenses can be greatly reduced. Because the gas radiation heating method does not heat the air, it is particularly suitable for heating high-ceiling industrial workshops with poor insulation and sealing conditions. 


	 



	<img src="http://m.soooyo.cn/Uploads/image/20241023/20241023111038_49052.png" alt="" /> 


 
IMPRESIND gas radiant heating system utilizes natural gas to burn in a generator to produce high-temperature smoke. The generated smoke flows in the negative pressure radiation pipe, causing the surface temperature of the radiation pipe to rise. The high-temperature surface of the radiation pipe generates infrared radiation, which transmits heat to the heating area. It is like the sun in winter, when the outdoor temperature is very low, but the sun emits infrared radiation, and people feel warm. This method changes the traditional method of heating the entire space by air, and directly heats the human body, without convection, heat exchange, or pipe loss, so the heat efficiency can be above 90%. 
 

	IMPRESIND Gas Radiation Heating System achieves electronic data collection through black ball sensors placed in the heating environment, which manages the different stages of combustion based on parameter settings and working hours to control temperature. The switch is entirely controlled by intelligent software and hardware, with pre-set times and temperatures. For example, it can automatically turn on in the morning when going to work and turn off automatically when leaving work in the evening. The temperature can also be set to 5°C at night for standby, maintaining a low temperature without the need for a dedicated person to guard. It can also achieve localized heating by only turning on part of the equipment in a specific area, while turning off the rest, which is not possible with other heating methods. This is one of the advanced energy-saving methods for high-ceiling industrial heating that is popular in the world today. 


	 



	<img src="http://m.soooyo.cn/Uploads/image/20241023/20241023111052_92269.png" alt="" /> 


 
Additionally, the gas-fired radiant heating system from IMPRESIND has an electronic control device that continuously monitors the pressure, ignition, and flame state of the radiation loop during each start-up of the fan for heating purposes. If an anomaly occurs, the gas supply is immediately shut off and the gas is placed in a safe area. 
 
In the infrared radiation heating environment, the indoor temperature is even and gentle, and the human comfort level is high. The perceived temperature of the human body is 2°C to 3°C higher than the actual indoor environment temperature, that is, under the premise of achieving the same level of comfort, the air temperature of the infrared radiation heating can be 2°C to 3°C lower than the air temperature of the convection heating. IMPRESIND gas infrared radiation heating system has good adaptability and can meet the heating needs of high-ceiling spaces such as industrial workshops, aircraft hangars, and warehouses, achieving heating on demand and reducing energy and operating costs.

小峰色戒网站_大奶一区_久久久国产毛片_欧美成人V片观看_国产一级片久久_久久久久1

Efficient heating and intelligent temperature control of IMPRESIND gas radiant heating system